Home » Products » Intellivox » Intellivox-DC1608
Search
See Us At
Contact Info
contact
Duran Audio BV
Zaltbommel, 5301 KK
The Netherlands
Email: info@duran-audio.com

Phone: +31(0)418 515583
Fax: +31(0)418 518077
KvK: 11024229



Features:

  • Superb Speech Intelligibility
  • Slim Unobtrusive Design
  • Wide Horizontal Dispersion
  • Vertical Beam Steering
  • Integral DSP power offering:
    • Control of Vertical Beam opening angle, elevation angle and focus distance
    • 8-band overall parametric EQ
    • Dual Line Inputs with individual volume and 4-band parametric EQ control
    • Volume Control
    • Delay up to 20 seconds + 10 seconds per input
    • Up to 8 user definable, password protected presets on board (recallable through third party control devices)
    • AVC (Automatic Volume Control) via build-in ambient mic.
    • Upgradeable firmware
    • Dual Lobe Software
  • Network Ready
  • Integral Surveillance
  • Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3

 

The AXYS® Intellivox-DC1608 is the successor to the Intellivox-1608  which was the world’s first commercially available digitally controlled high power loudspeaker array and since its introduction in 1999 the Intellivox-1608 has been specified to solve the problems of speech intelligibility and musical reinforcement in large highly reverberant spaces and theatres.
The Intellivox-DC1608 is offering extreme improved sonic performance compared to its predecessor. The Intellivox-DC1608 is ideally suited for Sports Arenas, Multipurpose Venues (including Cathedral style buildings), Concert Halls and Theatres. As well as offering extended frequency response, up to 20 kHz, the Intellivox-DC1608 is capable of delivering up to 108 dB SPL at 30 m. With an array length of 3.7 m the Intellivox-DC1608 not only offers long throw capability but also greater control at low frequencies. A single Intellivox-DC1608 is capable of covering an audience area up to 50 m whilst maintaining an even sound pressure level. For full range applications AXYS® Target Series digitally controlled sub woofer arrays can be used to provide enhancement and control at low frequencies. In order to achieve such outstanding performance the Intellivox-DC1608 comes with an external 3RU IntelliAmp that is equipped with a 32- bit floating point DSP (Digital Signal Processor) which handles the demanding mathematical calculations that are necessary to achieve highly accurate directivity control. In addition to this the DSP offers a wealth of useful audio processing features including: volume control, parametric EQ and delay. The fourteen, high efficiency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. In addition to the 6.5” loudspeakers there are also two coaxially mounted 1” compression drivers to extend the HF response. Power for the multi channel IntelliAmp is provided by a sophisticated switched mode power supply which will ensure years of reliable operation. An extensive set of surveillance functions have also been implemented to meet the stringent demands of typical VA applications. The unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing and surveillance features.

Typical applications include:

  • Transport Hubs
  • Large Places of Worship
  • Lecture Halls and Theatres
  • Large Conference Facilities
  • Atriums
  • Museums

 

3D direct SPL plot @ 1 kHz in a 70 x 56 x 35 m room, generated with DDA, showing the suppression above the listening plane .

Vertical cross section of direct SPL plot @ 1 kHz generated with DDA.

Options available include:

  • External Ambient Noise and Temperature Sensor

  • Input section with 1x 0dBV and 1x 100V

  • Full range of mounting accessories

  • Color matching service

 

 

Intellivox-DC1608
Support
an image
Development
an image
Strategy
an image