|
|
Features:
- Superb Speech Intelligibility
- Slim Unobtrusive Design
- Wide Horizontal Dispersion
- Vertical Beam Steering
- Integral DSP power offering:
-
- Control of Vertical Beam opening angle, elevation angle and focus distance
- 8-band overall parametric EQ
- Dual Line Inputs with individual volume and 4-band parametric EQ control
- Volume Control
- Delay up to 20 seconds + 10 seconds per input
- Up to 8 user definable, password protected presets on board (recallable through third party control devices)
- AVC (Automatic Volume Control) via build-in ambient mic.
- Upgradeable firmware
- Dual Lobe Software
- Network Ready
- Integral Surveillance
- Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3
|
|
The AXYS® Intellivox-DC808 was primarily designed to supplement Intellivox-DC1608 installations, covering balcony, off axis and shadow areas. The Intellivox-DC808 is ideally suited for Sports Arenas, Multipurpose venues, Concert Halls and Theatres. As well as offering extended frequency response, up to 20 kHz, the Intellivox-DC808 is capable of delivering up to 97 dB SPL at 30 m. A single Intellivox-DC808 is capable of covering an audience area up to 25 m whilst maintaining an even sound pressure level. For full range applications AXYS® Target Series digitally controlled sub woofer arrays can be used to provide enhancement and control at low frequencies. In order to achieve such outstanding performance the Intellivox-DC808 comes with an external 3RU IntelliAmp that is equipped with a 32-bit floating point DSP (Digital Signal Processor) which handles the demanding mathematical calculations that are necessary to achieve highly accurate directivity control. In addition to this the DSP offers a wealth of useful audio processing features including: volume control, parametric EQ and delay. The six, high effi- ciency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. In addition to the 6.5” loudspeakers there are also two coaxially mounted 1” compression drivers to extend the HF response. Power for the multi channel IntelliAmp is provided by a sophisticated switched mode power supply which will ensure years of reliable operation. An extensive set of surveillance functions have also been implemented to meet the stringent demands of typical VA applications. The unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing and surveillance features. |
|
Typical applications include:
|
3D direct SPL plot @ 1 kHz in a 70 x 56 x 35 m room, generated with DDA, showing the suppression above the listening plane (over sized room only for comparison reasons).
|
|
Options available include:
-
External Ambient Noise and Temperature Sensor
-
Input section with 1x 0dBV and 1x 100V
-
Full range of mounting accessories
-
Color matching service
|
Vertical cross section of direct SPL plot @ 1 kHz generated with DDA.
|
Intellivox-DC808 
